|
|
 |
| LINK® MP™ Reconstruction Hip Stem |
 |
 The LINK® MP™ Reconstruction Hip Stem is a modular hip stem designed to be implanted into the prepared femur as an assembly. The design helps the surgeon to achieve the best possible initial stability and long term fixation within the distal portion of femoral canal. The proximal design of the MP Hip Stem provides the ability to restore the leg length, neck offset and version of each individual patient.
The MP Stem is indicated in revision hip surgery to help replace voids in the bone or to repair a fracture
around or below an existing prosthesis. It is also an excellent device to use in conjunction with a proximal bulk
allograft. However, the versatility of the MP Hip Stem enables it to be considered for certain rare primary situations
to help compensate for dysplasia or insufficient bone. The device is also indicated for many
oncological total hip procedures to help replace bone loss deficiencies. The MP Hip Stem is designed for use
without bone cement and is cleared for such use with the U.S. FDA.
The Stems are manufactured from Tilastan® Titanium Alloy (Ti6AIV Eli) and have 70-micron Microporous texture. The Head/Neck Segments are also manufactured from Titanium Alloy. Spacers and Locking Screws are manufactured from Cobalt-Chromium Alloy or Aluminum Oxide Ceramic material.
Femoral Head Availability
a. Cobalt Chromium Alloy Femoral Heads for Link Hip Stems are available in two diameters;
28mm and 32mm. Dimensions listed are the lengths to the top of the head.
- The 28mm Femoral Head is available with a "short" neck; a "medium-short" neck; a "medium" neck and a "long" neck.
- The 32mm Femoral Head is available with a "short" neck; a "medium-short" neck; a "medium" neck and a "long" neck.
b. Aluminum Oxide Ceramic femoral heads for Link Hip Stems are available in two diameters;
28mm and 32mm. Dimensions listed are the lengths to top of the head.
- The 28mm Femoral Head is available with a "short" neck; a "medium-short" neck and a "medium" neck.
- The 32mm Femoral Head is available with a "short" neck; a "medium-short" neck and a "medium" neck.
Indications of Use
- Revision Hip Surgery:
- To replace voids in the bone.
- Repair of a fracture around or below an existing prosthesis.
- Oncological Total Hip Procedures - to help replace bone loss deficiencies.
- Considered for use in certainrare primary situations to help compensate for dysplasia or insufficient bone.
Important Notes:
- Wright and LINK® manufactured femoral heads can be used with the MP® Hip System.
- The LINK® MP™ Hip Stem with porous surface is intended for use without bone cement.
- This device is cleared for use without bone cement in the United States.
|
| |
|
|
 |
Surgical Techniques |
| LINK® MP™
|
|
Surgical Technique with The LINK® MP™ Hip Stemfor Revision of a Failed Femoral Hip Stem MH276-508
 Click Here to Download PDF
|
|
|
|
